Filter
Top Products
A22A22
Specifications W2252TE
NOTE
Information in this document is subject to change without notice.
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
&Weight
Tilt Range
Power Input
Environmental
Conditions
Stand Base
Signal cable
Power cord
22 inches (55.87 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size: 55.87 cm
0.282*0.282 mm pixel pitch
Horizontal Freq. Analog : 30 - 83 kHz (Automatic)
Digital : 30 - 83 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate TTL, Positive/Negative
SOG (Sync On Green)
Digital (HDCP)
Signal Input 15 pin D-Sub Connector
DVI - D connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Max Analog : VESA 1680 x 1050 @60 Hz
Digital : VESA 1680 x 1050 @60 Hz
Recommend VESA 1680 x 1050 @60 Hz
DDC 2B (Digital), DDC 2AB (Analog)
On Mode
: 22 W(Typ.)
Sleep Mode ≤ 0.3 W
Off Mode ≤ 0.3 W
With Stand Without Stand
Width 51.90 cm / 20.43 inches 51.90 cm / 20.43 inches
Height 42.96 cm / 16.91 inches 37.16 cm / 14.63 inches
Depth 22.00 cm / 8.66 inches 6.00 cm / 2.36 inches
Net 4.4 kg (9.7 lbs)
Tilt -5˚~20˚
AC 100-240V~ 50/60Hz 1.0A
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing
Attached( ), Detached ( O )
Attached( ), Detached ( O )
Wall-outlet type or PC-outlet type