Filter
Top Products
Wireless Projector Server User Manual
3
2. Overview
Front Panel
Rear Panel
3. Installation
3.1 Connect the power cable to the power socket on the rear of the unit
3.2 Connect the VGA cable from your Projector to the VGA connector on the rear panel
3.3 Turn on your projector
3.4 Turn on the Projector server
• When the projector server is ready the “POWER” LED and “WLAN” LED will show
green.
• When a LAN connection is established, the “LAN” LED will show green and will
blink during data transmission
Power
Switch
Power Socket
VGA
Connector
RJ-45 Port
Reset to Default
Button
External Antenna
LAN LED
WLAN LED
Power LED