Lindy 51188 Computer Accessories User Manual


 
PCIe 2S (16C550 16 FIFO)
+ 1P (IEEE 1284)
User Manual English
LINDY No. 51188
www.lindy.com
Introduction
Thank you for purchasing the LINDY PCIe two Port Serial and one Port
parallel Card. This card is equipped with two high speed RS-232 serial
interfaces and one 1284 centronics parallel interface.
The serial ports include 16Byte FIFO with speeds up to 430Kb/Sec and
up to 1.5MB/Sec on the Parallel port.
Port Specification
Serial Port:
Chipset: MosChip MCS9901, 16Byte FIFO
Compatible chips: with 16C550 and 16C450.
IEEE standard: RS-232 Interface
Max. Speed: Bi-directional speeds from 50 bps to 16Mbps/port
Parallel Port:
Chipset: MosChip MCS9901
IEEE standard: IEEE 1284 Interface
Max. Speed: Up to 1.5MB/Sec
Package Contents
1 x LINDY PCIe 2S + 1P PCI Card
Backplate with 1 x 25 Way D Female
LINDY User manual
LINDY Driver CD
Installation
1. Turn off the power of your computer and remove the power
cable
2. Install the PCI card into an available PCI slot in your computer
3. Connect the peripheral ie Printer, Modem, etc. to the adapters
port
4. Re-connect the power cable & turn on the power of your
computer
PCI device listing display (for example…)
Bus
No
Device
No
Func
No
Vendor ID Device
ID
Device Class IRQ
0 7 1 8086 7010 IDE Controller 14
0 13 0 1409 7168 Simple COMM.
Controller
10
If the Vendor ID, Device ID, Device Class or IRQ aren’t displayed or an
error occurs, please try another PCI slot.
Once the hardware has installed correctly you can start installing the
software from the driver CD.
Pin Assignments
Parallel 25 Pin female connector pin assignments:
Parallel 25 Pin female connector :
Pin
Signal Pin Signal Pin
Signal
1 STROBE 10 ACKNOWLEDGE 19
GROUND
2 DATA 0 11 BUSY 20
GROUND
3 DATA 1 12 PAPER EMPTY 21
GROUND
4 DATA 2 13 SELECT 22
GROUND
5 DATA 3 14 AUTO FEED 23
GROUND
6 DATA 4 15 ERROR 24
GROUND
7 DATA 5 16 INIT 25
GROUND
8 DATA 6 17 SELECT INPUT 26
GROUND
9 DATA 7 18 GROUND
Serial 9 Pin male connector pin assignments:
Serial 9 Pin male connector :
Pin
Signal Pin Signal Pin
Signal Pin
Signal
1 CD 4 DTR 6 DSR 8 CTS
2 RD 5 GROUND 7 RTS 9 RI
3 TD
Technical Specifications
2 independent RS-232 serial ports with communication speeds
up to 430Kbps
Designed to meet PCI-Express Base Specification Revision 1.1
Supports x1,x2,x4,x8,x16lanePCI-Express Bus connector
keys
High speed 16C550 compatible UART controller on-board
Supper IEEE 1284 Parallel ports standard
On-chip hardware auto flow control to guarantee no data loss
Built-in 16 byte hardware FIFO & 256K byte DMA software
FIFO
Certified by Microsoft WHQL,CE,FCC approval
Support DOS, Linux, MAC, Windows 2000/XP/2003 and Vista
Ready of the Intel and AMD 32/64-bit CPU System