Link electronic 816-OP/C Switch User Manual


 
816-OP/C SD SDI Switching Matrix
800 SERIES
LINK ELECTRONICS, INC.
SD SDI VIDEO SWITCH MATRIX
MODEL 816-OP/C
The AVS-816 has eight options to configure the unit to be Analog, SD/SDI or HD/SDI for Video and Audio. The
video can be configured for HD/SDI, SD/SDI or Analog. The 816-OP/C is the SD/SDI video plug-in board. The
AVS-816 chassis and the 816-OP/C board make up an SD/SDI video only switcher.
You must select the video and audio matrix to make up the desired switcher format. You have the choice of
analog or digital for video and audio to configure a video with audio follow switcher.
Software is supplied with all AVS series to control up to 32 switchers from a single computer. See data sheets
for the AVS-816/SA analog switcher and AVS-816/SD for SD/SDI system switcher. A remote control is
available for the unit, model PSR-816. The plug-in choices are:
AVS-816, Chassis, power supply and motherboard
816-OP/A, Analog video matrix, 16X1, two outputs
816-OP/B, Analog audio matrix, 16X1, two outputs
816-OP/C, SD SDI video matrix, 16X1, one SD SDI and one analog
816-OP/D, AES audio matrix, 16X1, one AES and one analog
816-OP/E, AES rear panel for Weco 3-pin connectors
816-OP/F, AES rear panel for BNC connectors
816-OP/G, GPI option
816-OP/HD, HD/SD SDI video matrix, 16X1, two outputs
Customer selects the above desired options, and the factory configures to your requirement.
LINK ELECTRONICS, INC. 2137 Rust Avenue Cape Girardeau, MO 63703-7668
Phone 573 334 4433
FAX 573 334 9255
MADE IN THE USA