IEC-754 Rear Panel
IEC-754/100302
Model PRT-700
MODEL IEC-754 Variable Delay Video Amplifier
SPECIFICATIONS
INPUT:
Video Level: .............. 1.0V p-p ±3dB
Impedance: ............ > 100KΩ, bridging
Common Mode Range: ..... 16Vp-p (60 Hz)
Maximum DC In: ................ ±5 VDC
CMRR: ................. >80dB @ 60Hz
OUTPUTS:
Number: ................Four each, BNC
Level:.................. Unity Gain, ±3dB
AMPLIFIER PERFORMANCE:
Frequency Response, No Delay:
..................... 0.5dB to 18 MHz
........................ -1 to 25 MHz
...................... -3dB to 32 MHz
Frequency Response, Maximum Delay:
.................... ±0.5dB to 10 MHz
........................ -1 to 12 MHz
...................... -3dB to 16 MHz
Output Isolation: .......>-40dB at 3.58 MHz
Return Loss: ..............40dB to 6 MHz
High Freq. Overshoot: ............. <0.4%
Ringing:........................ <0.4%
Tilt: ........................... <0.4%
Hum: ............. >70dB, below 1.0V p-p
Differential Phase: . . . <0.1°, 10% to 90% APL
Differential Gain: . . . <0.1%, 10% to 90% APL
FRONT PANEL CONTROLS:
Gain Control: .... ±3dB continuous from unity
Cable Equalizer: ....Equalizes up to 1000 Ft
Propagation Delay Trim: .............±5ns
ENVIRONMENTAL:
Temperature:.......... 0° to 50°C, ambient
Humidity: ......10% to 90% non-condensing
POWER:
DC Voltage: ........... +15 VDC (100 mA)
.................... -15 VDC (100 mA)
Power:....................... 7.2 watts
MECHANICAL:
Height:............................. 1"
Width: ........................... 5.5"
Depth: .......................... 9.25"
Weight: ...................... 2 lbs. 9oz
LINK ELECTRONICS, INC.
2137 Rust Avenue
Cape Girardeau, MO 63703
Phone: 573 334 4433
FAX: 573 334 9255
PROFESSIONAL SERIES--
stand-alone products--by LINK