Link electronic VSW-824 Switch User Manual


 
800 SERIES
MADE IN THE USA
LINK ELECTRONICS, INC.
VERTICAL INTERVAL VIDEO SWITCHER
8 X 1 S-VHS MATRIX, SERIAL CONTROL
MODEL VSW-824
FEATURES
8 S-VHS Source Inputs
1 Destination Output
Serial Controlled
Vertical Interval
Wide Bandwidth
Digital Switching
One Rack Unit Cabinet
Audio Follow Companion
Audio & Video Break-away
7 Seg LED Reads Source #
The VSW-824 Is a wide band-width vertical
Interval switcher designed for S-VHS inputs. It's
eight terminated inputs and single output allow the
user to efficiently and economically route or
delegate multiple S-VHS video signals.
Packaged in a 19" rack mountable cabinet, the
VSW-824 features 8 S-VHS inputs. High-quality
push buttons and LED digital readout of audio and
video channel selection make this unit an ideal
solution. Audio and video breakaway is front panel
controlled. . Serial control is provided through a D-
Sub connector. Remote control is provided
through a RJ-11 connector. Serial control
characteristics are RS-232, RS-422 and RS-485.
Switching is accomplished during the vertical
interval by using the vertical sync derived from the
video at the output stage of the VSW-824 video
swftcher.
The VSW-824 is a video-only switcher with both
sets of LED digital readouts for the audio and
video selected. When connected with the PAF-
823 audio follow unit, the VSW-824 selects the
video and it's Companion audio. A three position
front panel switch selects audio follow, audio
breakaway, and video break-away. There is one
output of the selected video on the rear panel.
LINK ELECTRONICS, INC. 2137 Rust Avenue Cape Girardeau, MO 63703-7668
Phone 573 334 4433
FAX 573 334 9255