Filter
Top Products
3
Chapter 2: Getting to Know the ADSL2 Modem
The Back Panel
ADSL2 Modem with USB and Ethernet
Chapter 2: Getting to Know the ADSL2 Modem
The Back Panel
The Modem's ports, where a network cable is connected, are located on the back panel.
ADSL This ADSL port is where you connect your ADSL service.
USB The USB port is where you connect the USB cable from your PC.
Ethernet The Ethernet port is where you connect the Ethernet Network cable from your PC.
Reset Button This is where you can reset the Modem to its factory default settings. To do so, use an object
like a ball-point pen to press in the Reset Button for approximately ten seconds.
Power Switch The Power Switch is where you turn the ADSL2 Modem on and off.
Power The Power port is where you connect the power adapter.
With these, and many other Linksys products, your networking options are limitless. Go to the Linksys website at
www.linksys.com/international for more information about products that work with the Modem.
Figure 2-1: Back Panel