Filter
Top Products
EtherFast
®
Network Attached Storage
The Instant GigaDrive™ has an internal beeper that beeps to indicate certain
events.
1 Beep This signals that the Reset button or Power switch has been
pressed.
2 Beeps Repeated every five seconds for one minute, this signals that
the Instant GigaDrive™ is configured as a DHCP client, but
no DHCP server responded to the DHCP client’s request.
3 Beeps Repeated every 15 seconds for three minutes, this signals
that the Instant GigaDrive’s hard disk usage exceeds 98%
capacity.
5 Beeps Repeated every 15 seconds for three minutes, this signals
that the Instant GigaDrive™ is overheating. An automatic
shutdown will be performed three minutes after the first
beep.
6
Instant GigaDrive
TM
Series
LAN Green. This LED flashes when data is transmitted or
received via the network.
Disk Green. This LED flashes when the Instant GigaDrive’s hard
drive is being accessed. It stays on during the self-test.
Disk Full Green. This LED lights up when the Instant Gigadrive™
has reached its maximum storage capacity.
Backup Green. This LED flashes when the Instant Gigadrive’s back-
up utility is active.
5
Beeper Codes
Figure 2-2