Filter
Top Products
Appendix
Windows 98 or 95/NT 4.0 Client Setup
If you are installing the EtherFast LAN Card in a
Windows 95 or 98 PC that you plan on logging into a
NT 4.0 file server, follow the directions below.
1. Follow the Windows 95 setup instructions or the
Windows 98 setup instructions
2. Start up Windows. Click on Start, Settings, then
Control Panel. Double-click on Network. The Network
window appears. Click on the Configuration tab.
3. In the Primary Logon Box, you have two choices.
Choose one:
Client for Microsoft Networks
Tells your PC to log into an NT 4.0 server where you
already have a username and password set up.
Windows Logon
Log in without a password, or log into both NT and
Novell NetWare servers in order on the network.
4. Under the The following network components are
installed box, highlight Client for Microsoft Networks
and click on the Properties button.
5. The Client for Networks Properties window will
appear. Under the Logon Validation box, make sure that
Log on to Windows NT domain is checked. Enter the
name of your domain into the Windows NT Domain box
6. Click on the Access Control tab. Make sure that
Share-level access control is selected; do not choose
User-level access control.
50
Appendix