Filter
Top Products
Novell 3.x Client Setup
for Windows 98 or 95
The instructions below explain how to set up the regular
Novell NetWare 3.x client for use on a Windows 98 or
95 PC. If you are installing NetWare’s Client32 software
instead, follow the instructions on page 38.
1. Follow the Windows 95 setup instructions or the
Windows 98 setup instructions.
2. Start up Windows 95 or 98. Click on Start, Settings,
then Control Panel. Double-click on Network. The
Network window appears. Click on the Configuration
tab.
3. In the Primary Logon Box, choose Client for NetWare
Networks.
4. Under the The following network components are
installed box, highlight Client for NetWare Networks
and click on the Properties button.
5. The Client for NetWare Networks Properties window
appears. Under the General tab, enter the name of your
network’s Preferred Server. Assign the First Network
Drive Letter; the default is F. Make sure the Enable
logon script processing is checked.
6. Click OK. Click on the Access Control tab. Make
sure the Share-level access control option is selected; do
not select User-level access control.
7. When you’re done, click OK to restart your comput-
er. The NetWare portion of your Windows setup is com-
plete.
52
Appendix