Filter
Top Products
A Division of Cisco Systems, Inc.
®
Model No.
Quick Installation
Model No.
Wireless
WAP54G
Access Point
Wireless-G
Package Contents
• Wireless-G Access Point
• Detachable Antennas
• Power Adapter
• Setup CD with User Guide
• Ethernet Network Cable
• Quick Installation
• Registration Card
1
A Locate an optimum location
for the Access Point. The best
place for the Access Point is
usually at the center of your
wireless network, with line of
sight to all of your PCs and
wireless accessories.
B Fix the direction of the
antenna. Try to place it in a
position that will best cover
your wireless network. Nor-
mally, the higher you place the
antenna, the better the perfor-
mance will be. The antenna's
position enhances the receiv-
ing sensitivity.
C Connect a standard Ethernet
network cable to the Access
Point. Then, connect the other
end of the Ethernet cable to a
switch or router. The Access
Point will then be connected to
your 10/100 Network.
D Connect the AC Power
Adapter to the Access Point's
Power Socket. Only use the
power adapter supplied with
the Access Point. Use of a dif-
ferent adapter may result in
product damage.
2
C The next screen displayed dis-
plays how the Access Point
should be connected while
running this Setup Wizard. Opti-
mally, you should perform this
setup through a PC on your
wired network. Click the Next
button to continue the Setup
Wizard.
D The Setup Wizard will run a
search for the Access Point
within your network and then
display a list along with the sta-
tus information for each
access point. If this is the only
access point on your network, it
will be the only one displayed.
If there are more than one dis-
played, select the Access Point
by clicking on it and click the
Yes button to continue the
Setup Wizard.
E You will be asked to sign onto
the Access Point you've
selected. Enter the Password
you've assigned. If none has
been assigned, enter the
default password: admin.
Then, click the OK button. (This
password can be changed
from the Web-based Utility's
Password tab.)
B
C
Now that you've connected the
Access Point to your wired network,
you are ready to begin setting it up.
This Setup Wizard will take you
through all the steps necessary to
configure the Access Point.
A Insert the Setup Wizard CD into
your PC's CD-ROM drive. Your
PC must be on your wired net-
work to set up the Access Point.
B The Setup Wizard's Welcome
screen should appear on your
monitor. If it does not, this
means the Setup Wizard is not
automatically running as it
should. Start the Setup Wizard
manually by clicking the Start
button, selecting Run, and typ-
ing d:\setup.exe (where "D" is
your PC's CD-ROM drive). Click
the Setup button to continue
this Setup Wizard. Clicking
Install Linksys Wireless Guard
Client installs the client soft-
ware, and the User Guide but-
ton opened this Guide. To exit
this Setup Wizard, click the Exit
button.
D
NOTE: The Access Point should be
configured through the Setup Wizard
and set up through a wired network
connection.
GHz
2.4
802.11g
Configuring the Access Point
Connecting the Access Point
E