Filter
Top Products
A Division of Cisco Systems, Inc.
®
Model No.
Quick Installation
Model No.
Wireless
WET11
Ethernet Bridge
Wireless-B
12
A Attach the Bridge’s antenna.
B Plug the included Ethernet
network cable into the LAN port
on the back panel of the
Bridge.
C The X-II (MDI/MDI-X) slide switch
offers a choice between two
settings. Slide the X-II switch to
the X position if you are
connecting the Bridge to a
PC’s network adapter. Slide the
X-II switch to the II position if
you are connecting the Bridge
to a hub or switch.
D Plug the other end of the
Ethernet network cable into the
RJ-45 port of the hub, switch,
or PC you wish to use to
configure the Bridge.
E Plug the supplied power
adapter into the Power port on
the back panel of the Bridge.
Then plug the other end into
an electrical outlet.
Connecting the Wireless-B
A
Setting up the Wireless-B
A Insert the Setup CD-ROM into
your PC’s CD-ROM drive. The
Setup Utility should run
automatically, and the
Welcome screen should
appear. If it does not appear,
click the Start button and
choose Run. In the field that
appears, enter D:\setup.exe (if
“D” is the letter of your CD-ROM
drive).
B Click Setup to begin the setup
process.
C Make sure the Bridge is
correctly connected to your
wired network. Click Next.
D The screen displays a list of
Wireless-B Ethernet Bridges on
your network, along with their
status information. Select the
Bridge you are currently
installing by clicking its name in
the Selection box. Click Yes.
E The Password screen will
appear. In lowercase letters,
enter admin in the Password
field. Then click Enter.
Package Contents
• Wireless-B Ethernet Bridge
• Quick Installation Guide
• Setup CD-ROM
• User’s Guide on CD
• Detachable Antenna
• Power Adapter
•Network Cable
• Registration Card
Ethernet Bridge for Setup Ethernet Bridge
B
E
D
E
GHz
2.4
802.11b
C