Filter
Top Products
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED
ENM2-1_DBL_LST_EN_0804.PDF • PAGE 1
ABuilding Safety. Building Security.
Ethernet Module
ENM2-1
Description
The Ethernet Module ENM2-1 is connected to the Serial
Interface Module SIM216-1 of a Fire Detection Control
Panel Series BC216 or BC016 and converts the com-
munication between the control panel and a PC into the
IP protocol. That allows the parameterisation software
PARSOFT to establish an easy remote access to the
Fire Detection Control Panels Series BC216 and BC016
for the purpose of setup and maintenance.
The system administrator of the customer LAN integra-
tes the Ethernet Module ENM2-1 into the customer LAN
like any other device, e.g., PC or network printer.
The Ethernet Module ENM2-1 is set via the confi gu-
ration software Confi gENM2, which can be found on
the CD-ROM containing the parameterisation software
PARSOFT.
The remote PARSOFT PC contacts the ethernet module
via the set IP address. The operation of PARSOFT is the
same for local access and for remote access.
• Remote setup and maintenance
of Fire Detection Control Panels
Series BC216 and BC016
• Module setup via confi guration
software Confi gENM2
• Power supply through fi re detection
control panel possible
• Serial data cable included
Specifi cations
Operating voltage 21 – 30VDC
Current consumption at 24V 45mA
Ambient temperature +5°C to +50°C
Relative humidity max. 95% (no condensation)
Dimensions W × H × D 100 × 90 × 25 (mm)
Weight 150g
Order number 223025
Order name Ethernet Module ENM2-1