LST RL58-1 Network Card User Manual


 
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED
RL58_DBL_LST_EN_0804.PDF • PAGE 1
ABuilding Safety. Building Security.
Relay Modules
RL58-1/RL58-2
Description
Specifi cations
The fi re detection control panels Series BC216 and
BC016, respectively, provide 16 freely programmable
open-collector control outputs. Eight of these outputs
are connected to a fl at cable connector. The Relay Mo-
dules RL58-1 and RL58-2 allow for the easy conversion
of these control outputs to dry changeover contacts.
The componentry is connected to the fi re detection con-
trol panel via a fl at cable.
The RL58-1 provides eight relay outputs with a maxi-
mum contact rating of 30W. The current is limited to 1A
and the voltage is limited to 60VDC. The RL58-2 offers
four relay outputs with a maximum of 5A/230VAC. The
terminal of the RL58-2 are designed for mains voltage.
Two relay modules RL58-2 are each cascadable via pin
connectors. The relay module is delivered with fl at ca-
ble and mounting accessories for easy installation.
8 or 4 relay outputs, respectively,
with one dry changeover contact
each
Actuation display by LED for each
output
Switch contacts on terminals
Easy mounting on componentry
carrier
Connection with control panel via fl at
cable
Operating voltage 20 – 31VDC
Current consumption at 24V typ. 22mA per activated circuit
Control current typ. 1.2mA per input
Ambient temperature -5°C to +50°C
RL58-1
Switching power per contact 1A/60V/30W
Contact life approx. 5 mill. switching cycles (unloaded)
approx. 300,000 switching cycles (at 24VDC/1A)
Dimensions L × W × H 85 × 65 × 37 (mm)
Weight 330g
Part No. 222004
Order name Relay Module 8-Fold/60VDC RL58-1