Filter
Top Products
Insert Lyson refillable cartridges into Epson 3800 printer in correct colour order.
Make sure all cartridges are clicked securely into position.
Step 13
Close cartridge lid down. Allow printer to charge inks. Check that printer status
monitor is correctly reading new Lyson cartridges with a ‘full’ status on all colour
channels.
Step 14
Allow refillable cartridge inks to settle for at least 10 minutes (this allows the bubbles
in your inks to disperse) before performing a nozzle check printout.
Step 15
Perform manual nozzle check prints and cleaning cycles until you get a good nozzle
check. Do not use the auto nozzle check function as this just wastes ink. You may
need to perform 4 5 manual head cleanings before you get a good nozzle check. If
so be sure to lease at least 5 minutes between a head clean and a nozzle check print.
This allows time for the air pressure within the system to equalize.
Please read the Lyson 3800 Operating Instructions next. This will show you how to
operate your RCS Lyson inkset, using the printer profiles supplied, and how to take
advantage of our special custom profile offer.