Filter
Top Products
7
Connecting a PC or Laptop to MaxAttach
1. Go to Network Neighborhood. The name of your workgroup should be displayed
here. If not, click on Entire Network. Double click on your workgroup name and your
server name. Your unit should appear. Double-click on your unit. All available shares
should be displayed. If not, see Troubleshooting Section 10.5. Click on share, its
folders will appear.
2. Now, choose the share for your PC or laptop. Right click on share, and a drop down
menu will appear. Select Map Network Drive. Another window will appear, select
an available drive letter, not the one used for your CD-ROM. Try to choose one that
is higher than letter F. Make sure that the Reconnect at Logon box is checked. Press
the Enter key or click OK. You are done.
3. To verify that your drive now exists, click on My Computer. The new drive should now
appear.
8
Restarting the System
1. Ask users to save their data and log out. Then go to the Tools option in the left
navigation bar. Click on the shutdown tab. Make sure all users are logged out.
Your setting and configuration information will be saved.
2. If you want Restart to occur immediately, change the How Long to Execute to
0 minutes. Click on the Restart button.
3. When the restart is done, you will be asked to enter your password. Enter it, then
press the Enter key or click OK.
9
Logging Off
1. Logging off for the administrator is only necessary for security reasons. Also, after
two minutes, your system automatically logs you off. You will get a logon prompt
when you try to reenter.
2. To log off, select the Log Off option in the left navigation bar. Follow the prompts.
10