Filter
Top Products
5
4.3 Assigning a Unit Name and Workgroup
1. Enter a name for your unit, so users can find it in the Network Neighborhood
or Windows Explorer. When creating a unit name, be sure it is unique. It
should NOT have the same name as any other device on your network. You
can use up to 15 characters.
2. If you haven’t changed your PC or laptop’s workgroup name, the default name
will be Workgroup. We recommend that you use this default name. Click Next.
If you are not sure of the workgroup name or you can’t see the unit in the
Network Neighborhood, see Section 10.3.
3. If you see a panel asking you to assign an IP address, go to Section 4.4.
If you do not, the initial configuration process is done. Click Reboot.
4. When the Reboot is done, you will be asked to enter your password. Enter it,
then press the Enter key or click OK. Your unit is now ready for use. To register
your unit, continue to Section 5.