Filter
Top Products
Parameter description:
y Aging Time:
Delete a MAC address idling for a period of time from the MAC Table, which will not affect static MAC
address. Range of MAC Address Aging Time is 10-1000000 seconds. The default Aging Time is 300
seconds.
y Learning Limit:
This is to set up the maximum amount of MAC that each port can learn. Valid learning limit ranges from
0-8191. As to port 25~port 26, only the fixed value “8192” is assigned to these two ports and user
cannot configure this value.
3.10.3 Static
The function of Static is used to configure MAC’s real manners inside of the switch. Three kinds of manners
including static, static with destination drop and static with source drop are contained in this function.
As “static” is chosen, assign a MAC address to a specific port, all of the switch’s traffics sent to this MAC
address will be forwarded to this port.
As “static with destination drop” is chosen, the packet will be dropped if its DA is equal to the value you set up.
Due to this setting belongs to the global one, so, it may affect all ports’ transmission of the packets.
As “static with source drop” is chosen, the packet will be dropped if its SA is equal to the value you set up. Due
to this setting belongs to the global one, so, it may affect all ports’ transmission of the packets.
Parameter description:
y MAC:
It is a six-byte long Ethernet hardware address and usually expressed by hex and separated by
hyphens. For example,
00 - 40 - C7 - D6 - 00 - 01
31