Filter
Top Products
y Mode: Used for the activation or de-activation of Port Mirror function. Default is disabled.
y Monitoring Port: Set up the port for monitoring. Valid port is Port 1~26 and default is Port 1.
y Monitored Ingress Port: Set up the port for being monitored. It only monitors the packets received by
the port you set up. Just tick the check box (;) beside the port x and valid port is Port 1~26.
y Monitored Egress Port: Set up the port for being monitored. It only monitors the packets transmitted
by the port you set up. Just tick the check box (;) beside the port x and valid port is Port 1~26.
3.17.2 Isolated Group
Isolated Group function can let the port be independent of other ports in the isolated group, and the
communication is also forbidden between these ports. But, the ports of the isolated group are still able to
communicate with the ports of the non-Isolated group. With this design, it will be helpful to the administrator to
immediately find and solve the port that results in the occurrence of looping problems in the network.
Parameter description:
y Mode: Used for the activation or de-activation of Isolated Group function. Default is disabled.
y Isolated Group: User can choose any port to be the member of this group. Just tick the check box ( )
beside the port x and valid port is Port 1~26. In this group, all of these member ports cannot forward
packets with each other. Thus, the switch will not be capable of forwarding any packets in case its all
ports become the members of the isolated group.
3.17.3 Restricted Group
The function of the Restricted Group can decide the direction of transmitting packets for the specific port. The
packets received by the port with the “Ingress” mode of Restricted Group will be sent to the ports with the
“Egress” mode of Restricted Group.
Parameter description:
y Mode: Used for the activation or de-activation of Restricted Group function. Default is disabled.
y Ingress: Select the ports that you would like their Restricted Group to set into “Ingress” mode. Just tick
the check box beside the port x and valid port is Port 1~26.
54