Filter
Top Products
is available or not. You can simply fill in a known IP address and then click <Ping> button. After a few seconds
later, the switch will report you the pinged device is alive or dead in the field of Ping Result.
3.21 TFTP Server
Specify the IP address where the TFTP server locates. Fill in the IP address of your TFTP server, then press
Apply button to have the setting taken effect.
3.22 Log
This function shows the log data. The switch provides system log data for users. There are 19 private trap logs,
5 public trap logs. It displays the log items including all SNMP Private Trap events, SNMP Public traps and
user logs occurred in the system. In the report table, No., Time and Events are three fields contained in each
trap record. The switch supports total 120 log entries. For more details on log items, please refer to the section
of Trap/Alarm Configuration and SNMP Configuration.
Parameter description:
y No.: Display the order number that the trap happened.
y Time: Display the time that the trap happened.
y Events: Display the trap event name.
62