Filter
Top Products
3. Web-based User Interface
3.1 Setting up Connection
This switch can be managed using a standard Web Browser from any computer attached to the network. The
SNMP management feature also permits the switch to be managed from any SNMP network management
station running a network management program. Factory Default value of system is:
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.254
It supports a simple user management function allowing only one administrator to configure the system at the
same time. If there are two or more users using administrator’s identity, the switch will allow the only one who
logins first to configure the system. The rest of users, even with administrator’s identity, can only monitor the
system. For those who have no administrator’s identity, can only monitor the system. There are only a
maximum of three users able to login simultaneously in the switch. To optimize the display effect, we
recommend you use Microsoft IE and have the resolution 1024x768.
Login account by default is:
Username: admin Password: admin (read/write)
Username: guest Password: guest (read only)
Here is the whole function tree with web user interface and we will travel it through this chapter.
7