Filter
Top Products
Support Protocol-based VLAN
In order for an end station to send packets to different VLAN, it has to be
either capable of tagging packets with VLAN tags or attached to a VLAN-
aware bridge that is capable of classifying and tagging the packet with
different VLAN ID based on not only default PVID but also other information
about the packet, such as the protocol. VDSL Switch will support protocol-
based VLAN classification by means of both built-in knowledge of layer 2
packet formats used by selected popular protocols, such as Novell IPX and
AppleTalk’s EtherTalk, and some degree of programmable protocol matching
capability.
5.9.1 Basic
This interface allows users to assign VLAN membership to each port. The
procedure for setting VLAN member is as follow.
1. From the main menu, under ‘Administrator’, click on <VLAN
config>.
2. Click <Add>.
3. Type a VID (Valid Range: 2-4094). The default is 1.
4. From the Available ports box, select ports to add to the VLAN and
click <Add>.
5. Click <Apply>.
26