Filter
Top Products
4
Installation
Installation is easy-- simply connect the cables and the power cord.
The system is ready, and you can use all the features.
Connect each station to the switch by twisted-pair cable. Plug one of
the RJ-45 connectors into a RJ-45 port of the switch, and plug the
other RJ-45 connector into the station’s network adapter. Power on
the switch and then the system is ready.
All ports could be used to connect with another switch. As all the
ports support auto-uplink (MDI / MDI-X) function, user can choose to
use a straight cable or a crossover cable to make a switch-to-switch
connection.
For cable selection, refer to the following table：
Network
Speed
Connector Cable Type Max.
Length
10BaseT RJ-45 Cat. 3, 4, 5 UTP/STP 100 m
100BaseTX RJ-45 Cat. 5 UTP/STP 100 m
Note: To prevent costly equipment damage and downtime, please
consider installing a surge suppression device or a UPS
(Un-interrupted Power Supply).