Filter
Top Products
English-4
Quick Start
To attach the Diamond Plus 230
SB
monitor to your system, follow these instructions:
1. Turn off the power to your computer.
2. If necessary, install the display card into your system. For more information, refer to the display card manual.
3. For the PC: Connect one end of the signal cable to the connector of the display card in your system (Figure A.1).
Tighten all screws.
For the Mac: Connect the Macintosh cable adapter (not included) to the computer (Figure B.1).
Attach one end of the signal cable to the Macintosh cable adapter (Figure B.1).
NOTE: Some Macintosh systems do not require a Macintosh cable adapter.
4. Connect the other end of signal cable connector on the back of the monitor.
NOTE: Incorrect cable connections may result in irregular operation, damage display quality/components of CRT monitor.
5. The Windows
®
95/98/2000/Me/XP INF file for your monitor can be found on the CD-ROM, delivered with the monitor.
6. Connect one end of the power cord to the AC inlet on the back of the monitor and the other end to the power outlet
(Figure C.1).
7. Turn on the monitor (Figure D.1).
8. Turn on the Computer.
NOTE: If you have any problems, please refer to the Troubleshooting section of this User’s Manual.
Figure A.1
Figure B.1
Figure C.1
Power Cord
Power Outlet
Figure D.1
Power Button
Power Indicator
Mac Adapter
(not included)