Monarch 938 Barcode Reader User Manual


 
Assure High Quality Bar Codes
Performs Industry Standard Bar
Code Tests
Fully Integrated Printer Interface
Used with 9855 , 9855™RFID or
9860 Printers
Rugged Stand to assure
Alignment
Monarch
®
938
Verifier
Product Specification
Avery Dennison Printer Systems Division
170 Monarch Lane Miamisburg, OH 45342
1.800.543.6650 Monday-Friday, 8 AM-6:30 PM ET
www.monarch.com
Standard Features
©2008 Avery Dennison. All rights reserved.
Printed in U.S.A. BC-SP-028 Rev. 8/08
Dimensions:
Height – 2.4" (61 mm)
Width – 4.4" (112 mm)
Depth – 5.2" (132 mm)
Weight (Verifier only) – 2.0 lbs. (0.9 kg)
Shipping Wt. (w/ stand) – 15 lbs. (6.8 kg)
Supported Bar Code:
Code 128, Code 39, Code 93, Codabar, Interleaved 2
of 5, UPC versions A and E (including +2 and +5),
EAN-13 and EAN-8 (including +2 and +5)
Communications Interface:
DB 9 pin (male) connecting to printer serial port with
baud rates up to 115200
Display:
Five LEDs – Power/Sync, Calibration, Read and 2
programmable
Warranty:
One (1) year parts and labor (ship-in).
Full written warranty statement is available on request.
Environment Ranges
Operating Temperature:
40° to 104° F (4° to 40° C)
Storage:
-4°F to 140°F (-20°C to 60°C)
Humidity/Operating and Storage:
10% to 90% non-condensing
Performance
Laser:
Focus Distance – 8" (203 mm)
X Dimension – 0.0067" (0.17 mm) minimum
Wavelength – 650-670 nm
Speed:
Verifies bar codes at print speeds up to 12 ips
Power Source:
Supplied by the printer, no external power is required
Bar Code Verification:
ANSI Method, Traditional Method, Encoded data
format checks, laser scanning type analyses
Stores & Uploads:
ANSI grade data
Special Considerations
Support parallel (picket fence) bar codes only
Bar code must be in the beam for at least 5 scans
May require a reduction in print speed based upon
bar code height
Maximum of four parallel bar codes across
Minimum horizontal gap between codes 0.5" (13 mm)
Minimum feed length for verification is 1.2" (30 mm)
Maximum number of codes per label is 10
Allow a 0.5" (13 mm) no scan zone at trailing of
each label
Does not work with 926™ knife
For use with 9855
®
, requires metal cover or plastic
verifier cover
Printer must be configured as verifier-ready
Documentation available at www.monarch.com