Filter
Top Products
MRV Communications, Inc. – Installation Manual
60
Tool Kit, Equipment and Materials
TOOLS
1. Electric drill (impact for masonry), reversible, with
speed control and 0-13mm chuck
2. Drills set High Speed Steel (HSS) 3-13mm.
3. Concrete carbide .bit drills 6,8,9 and 10mm (regular
and long shank).
4. Adjustable (crescent) wrench 6”, 10”.
5. Open-ring wrenches (spanners), standard and metric.
6. Vice grip pliers 10-12”
7. Cutter, long nose pliers, electrician’s pliers (insulated).
8. Pen, Pencil, Permanent markers.
9. Lens cleaning clothes.
10. Screwdrivers (flat and Philips), sizes 1, 2, 3 + power
screwdriver bits.
11. 50m extension cable + 3 outlet multiple electrical tap
12. 200g hammer.
13. Blade knife.
14. Ratchet handle driver.
15. Socket wrenches 8mm, 10mm, 11mm, 13mm, 14mm,
½” .
16. MRV JITK, see next page for details.
MATERIALS
1. Anchors (wall plugs) “UPAT” 13mm diameter
2. Hex-head screws to fit wall plugs 40, 60, 75mm length.
3. Assortment of screws, nuts, washers, spring washers.
4. Electric insulation tape.
5. Super glue, tie wraps (Panduit™).
6. 20 mm fuse SB, 125mA, 160mA, 250mA,
500mA, 1A
ELECTRONIC &
GENERAL
EQUIPMENT
1. Digital voltmeter (DVM)
2. 2 Walkie Talkies or cellular phones.
3. Binoculars
4. Four STP cables (two cross and two straight)
terminated with RJ-45 connectors each end.
OPTICAL
EQUIPMENT
(if relevant)
1. Optical Power Meter (Fotec, Noyes, Acterna…)
with fiber sockets.
2. 2 sets of multimode (62.5 µm) and Singlemode
(15µm) optical fibers with SC terminations.
LAB EQUIPMENT
E1/ETH/ATM/Fast Ethernet BER Test equipment-
depending on TS model.
APPENDIX D