Filter
Top Products
Just in case …
Corrective cleaning
Here are some simple cleaning procedures for keeping your fax machine operating
smoothly. Use each as the need arises.
Curing frequent jams in the document feeder
If you’re having trouble with getting your original documents to feed properly, try
this procedure:
1
Turn off your fax machine.
2
Get two soft, lint-free cloths and moisten them as follows:
• One with a cleaner suitable for use on platen/rubber rollers
• The other with isopropyl alcohol
3
Open the scanner cover by holding the
scanner cover release.
Important: You must hold the cover
open. It won’t stay open
by itself.
4
Use the cloth with the
rollers cleaner to clean
the face of the rollers.
Rotate the rollers
by hand to allow
cleaning of the
entire roller surface.
5
Use the cloth with the
isopropyl alcohol to clean
the contact glass.
6
Gently close the scanner cover, making sure both sides are snapped
down securely.
If you have unsatisfactory printout quality
Your machine automatically cleans its charger and transport roller, two items
which are very important to printout quality. So, if you notice poor printout quality
(whether on received faxes or on copies), it may mean that your machine requires
service. Review “Print quality problems” (pages 3.4–3.5), and see whether any of the
proposed solutions helps your machine. If none does, please call your authorized
Muratec dealer or call the Muratec Customer Support Center at (972) 364-3350.
3.12