Muratec M860 Fax Machine User Manual


 
Getting Started
1.14
EasyStart
Your Muratec fax machine comes with EasyStart ---- a quick introductory program
which makes it easy for you to enter the basic information necessary to get started
right away.
Important:
You can
always
change
any
of these settings later, as you
familiarize yourself with your fax machine and your fax
communications needs. Also, be sure you have correctly plugged in
your machine (see page 1.11) before proceeding.
Clearing Memory
Before you use EasyStart to enter information into your fax machine, it’s best to
clear its memory. The fax machine’s user settings, protected by a long-life battery
backup, store information such as your fax number and the date and time.
Clearing the memory ensures that only your information is stored.
To clear the fax machine’s memory, press
program
,
,
2
,
mode/enter
.
Using EasyStart to Enter Initial Settings
Important:
Be sure your fax machine has paper before proceeding with
EasyStart, since this procedure will print a settings list at the end.
1. Press
program
,
7
,
mode/enter
,
1
,
4
.
User Install
2. Press
mode/enter
to select the displayed setting.
97 07 14 00:00
3. Enter the date and time (in 24-hour format) using the numeric keypad, “typing
over” the numerals displayed. If you want to change just one numeral in the
date or time, press one-touch key
a
to move leftward in the line or one-touch
key
b
to move rightward.
To save the change, press
mode/enter
.
Set Your TTI?
4. Press
mode/enter
to enter a TTI.
_ABCDEF >
Enter the name you want to appear at the top of your faxes. Make sure it
doesn’t exceed 25 characters. (As you enter your TTI, you will only see the six
most recent characters you entered.)
You can choose among uppercase letters, lowercase letters, numerals and
symbols. Use the numeric keypad, as shown,
to select character choices and enter
characters. (For spaces, use the
leftmost character in each line of
choices.)
Note:
If you make a mistake, press
contrast/cancel
to erase,
leftward. Then re-enter until
the name is as you wish.
When done, press
mode/enter
.
Set Fax #?
5. Press
mode/enter
to enter a fax number.
_
Use the numeric keypad to enter your fax number, up to 20 digits in length.
(To put in a dash for easier reading, as shown here, press
hold
once.)
Note:
If you make a mistake, just press
contrast/cancel
to erase, leftward.
Then re-enter until the fax number is just as you want it.
To save the number, press
mode/enter
.
Tel Type: Tone
6. Press
program
to select your fax machine’s dialer as required by your
telephone system.
7. To save the change, press
mode/enter
. Your fax machine will now print a
list of its settings
Enter
Change
character choice
Scroll
within set
Change
character choice
Scroll
within set