Filter
Top Products
22
Chapter 2 Settings and Adjustments
2-8 Setting On/Off for the automatic
brightness adjustment function
[Auto EcoView]
The sensor on the front side of the monitor detects the environmental brightness
to adjust the screen brightness automatically and comfortably by using the Auto
EcoView function.
(1) Press
.
The <EcoView> setting menu appears.
(2) Choose "Auto EcoView" with or . (You can also choose it with .)
(3) Select “On” or “Off” with or , and press .
2-9 Shifting to the power saving mode
when a person leaves the monitor
[EcoView Sense]
The sensor on the front side of the monitor detects the movement of a person by
using the EcoView Sense function. When a person moves away from the
monitor, it shifts to the power saving mode automatically and does not display
the images on the screen to reduce the power consumption. When a person
comes near the monitor again, it comes back from the power saving mode and
displays the images. The detection level of the EcoView Sense sensor can be
changed according to the environment of usage.
●
To set EcoView Sense On/Off
(1) Press .
The <EcoView> setting menu appears.
(2) Choose "EcoView Sense" with or . (You can also choose it with .)
(3) Select “On” or “Off” with or , and press .
●
To change the detection level
The default setting is "Auto". If the monitor does not shift to the power saving
mode as you intended, change the detection level according to the following
procedure.
Adjustable range: see below list
Level
Detectable
Range
Details
Auto
(default setting)
Automatic setting
(120 cm or less)
The detectable range is dened by the
person's movement. When you get out
of the range, the monitor shifts to the
power saving mode. Since the function
determines whether the object is moving
or not, the monitor can shift to the power
saving mode even if there is a chair or wall
in the detectable range.
Manual1
Automatic setting
(90 cm or less)
Manual2 120 cm or less
When you get out of the detectable range,
the monitor shifts to the power saving
mode. This setting is recommended if
the monitor frequently shifts to the power
saving mode when the level is "Auto" or
"Manual1" even though you are in front of
the monitor.
Manual3 90 cm or less
NOTE
• Be careful not to block the sensor on
the lower side of the monitor when
using the Auto EcoView function.
NOTE
• Be careful not to block the sensor on
the lower side of the monitor when
using the Auto EcoView function.
NOTE
• When the orientation of the
Adjustment menu is set to "Portrait",
the EcoView Sense is turned off (see
2-13 "Setting Orientation" on page
26). Change the setting to on.
NOTE
• When the orientation of the
Adjustment menu is set to "Portrait",
the EcoView Sense is turned off (see
2-13 "Setting Orientation" on page
26). Change the setting to on.
NOTE
• If any moving object has not been
detected for a certain period of
time when the detection level is set
to "Auto" or "Manual1", the icon
appears that indicates the monitor is
shifting to the power saving mode.
NOTE
• If any moving object has not been
detected for a certain period of
time when the detection level is set
to "Auto" or "Manual1", the icon
appears that indicates the monitor is
shifting to the power saving mode.