Filter
Top Products
National Instruments
™
and ni.com
™
are trademarks of National Instruments Corporation. Product and company names mentioned herein are
trademarks or trade names of their respective companies.
322835A-01 Copyright © 2001 National Instruments Corp. All rights reserved. April 2001
USER GUIDE
MCA-7724 M
OTION
A
XIS
R
OUTER
Introduction
The MCA-7724 Motion Axis Router reroutes the signals from your motion
controller into separate connectors that connect to different motion
accessories. The router allows you to connect one, two, three, and four axis
drives and accessories to a controller.
Features
The MCA-7724 Motion Axis Router has five 68-pin VHDCI connectors:
the controller connector, connector A, connector B, connector C, and
connector D. Figure 1 shows the five connectors.
Figure 1. MCA-7724 Motion Axis Router Connectors
ACCESSORY CONNECTORS
CONNECTOR A
CONNECTOR C CONNECTOR D
CONNECTOR B
>
>
<
<
2+2
3+1
MOTION I/O
CONTROLLER CONNECTOR
Front
Back