Filter
Top Products
4-24 Chapter 4: 7401-4xxx Hardware Installation
Finalizing the Installation
After the hardware installation has been completed, the terminal can
be powered up to finalize the installation. The operating system, along
with platform modifications, is pre-installed. The following sections list
the steps involved to complete the system installation for each of the
Gold Disk operating systems.
Completing the OS Installation (Win2000)
The system automatically reboots when the image recovery is complete
and starts the software installation. This installation also installs most
of the additional software and drivers that are included in the disk
image. Complete the installation as follows.
8. After the terminal reboots, it will perform a disk check and then
continue with the Windows 2000 installation.
9. Enter the User Name and Organization.
10. Enter the Computer Name for the client.
11. Enter the Administrator’s Account Password (optional)
12. When prompted, press Finish to reboot the client.
13. Login when prompted.
14. Run the MicroTouch screen calibration from the Desktop icon.
Completing the OS Installation (WinXPe)
The system automatically reboots when the image recovery is complete
and starts the software installation. This installation also installs most
of the additional software and drivers that are included in the disk
image. Complete the installation as follows.
11. Click the Admin button to login as Administrator.
12. Read the EULA (End-User License Agreement) information in the
DOS window, then type EXIT and press Enter to close the DOS
window.