Filter
Top Products
Using the BIOS Setup Utility
Basic System Configuration
NCR S10 Desktop Server User Guide 4-5
2. Press the [Page Down] key to move to the next
page, or press the [Page Up] key to return to the
previous page.
3. After you select the desired option for a given
parameter, press the appropriate arrow key to
highlight the next parameter. This option is now set
as the configuration value.
Figure 4-3 shows Page 2 of the Basic System
Configuration menu.
Basic System Configuration
Enhanced IDE Features
Hard Disk Block Mode
Advanced P10 Mode
Hard Disk Size > 504MB
Hard Disk 32 Bit Access
Num Lock After Boot
Memory Test
Auto Config Mode
Fast Boot Mode
Communication Settings
Baud Rate
Parity
Stop Bits
Data Lengths
[9600] BPS
[None]
[1] Bits
[8] Bits
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
= Move Highlight Bar,
PgDn/PgUp = Move Screen, F1 = Help, Esc = Exit
= Change setting,
Page 2/2
To use the Help option, press [F1]. A window displays
on the screen with a brief description of the currently
highlighted parameter.
The following sections explain the different parameters
and their settings.
Figure 4-3
Basic System Configuration Menu
(Page 2 of 2)