Filter
Top Products
6-9
<Problem> Projection to the screen is not possible when using the LAN environment. (DIU 2.0, IEU 1.0)
Check Points
Countermeasures
Have LAN cards (i.e., adapters) been put into both the personal
computer and the projector?
Put LAN cards (i.e., adapters) into both the personal computer
and the projector.
Have the LAN settings (for both the personal computer and the
projector) been completed?
Perform the LAN settings for both the personal computer and
the projector.
Are a wired LAN and a wireless LAN being used simultaneously
with the same personal computer?
Please cancel either one of the LAN connections. When a built-
in type is used, set it to "not used" under Properties.
Image Express Utility 1.0 does not support the following:
(1) Software using Direct X
(2) MS-DOS screens
(3) Microsoft Office assistant
(4) IME
(5) When starting a moving video application first or using some computer’s environments, sending a moving video image may not
be possible.
<Problem> Operation of this projector software becomes unstable. (DIU 2.0, IEU 1.0)
Check Points
Countermeasures
When the network settings of the projector or personal
computer are changed while this projector software (i.e.,
Dynamic Image Utility 2.0 or Image Express Utility 1.0) is
starting or running, the operation of the projector software may
become unstable.
Please restart the projector and the personal computer. When
changes are to be made to the network settings, exit the
projector software before making the changes.
An application error occurs under Image Express Utility 1.0
when the screen resolution is changed during Continuous
Transmit.
When changes are to be made to the screen resolution, exit
Image Express Utility 1.0 before making the changes.
<Problem>The colors become strange when Windows is set to 256 colors. (IEU 1.0)
Check Points
Countermeasures
Image Express Utility 1.0 does not support 256 colors. Please set the Windows number of colors setting to High Color
(15 bit) or higher.
6. Using the Projector in a Network
On the LT260K and LT240K, images cannot be sent from the
“Dynamic Image Utility 2.0” on a PC to the projector on the
Continuous Transmit of the Image Express Utility 1.0.
Quit the Continuous Transmmit in the Image Express Utility 1.0
and then send the image from Dynamic Image Utility 2.0.