Filter
Top Products
Using External Devices 8-5
Keyboard/Mouse
You can add a full-size PS/2-style keyboard or PS/2-style mouse to your NEC Versa
using the Plug and Play feature. The PS/2 style keyboard and the PS/2 style mouse are
warm insertable allowing you to connect the devices while the NEC Versa is powered
on. You can continue to use the system keyboard and VersaGlide touchpad while an
external keyboard or mouse is connected.
Note
For information about disabling the VersaGlide while an external mouse is
connected, refer to, "How to Use BIOS Setup," in Chapter 3. The PS/2 Mouse
parameter in the Advanced CMOS Setup section of the BIOS Setup parameters allows
you to enable or disable the VersaGlide touchpad.
To attach both an external keyboard and an external mouse at the same time, use the
optional NEC Y-adapter. For ordering information, contact your NECC dealer.
Note
If you purchased this product outside the U.S. or Canada, contact the local
NECC office or their dealers for ordering information.
To connect an external keyboard or mouse simply put the system into a suspended
state, connect the device to the keyboard/mouse port, then resume the system when the
connection is secure. You are now ready to use your external keyboard or mouse.
Connecting an external keyboard/mouse