Filter
Top Products
Using the BIOS Setup Utility 3-29
Identifying the Switch Settings
A six-position dip switch is located on the bottom of the system. The switch is
accessible by removing the access panel beneath the CD-ROM drive. The following
list identifies each switch setting and its function.
!
Switch 1, Password override — The default setting is “OFF.” If you forget your
password and cannot access the data on your NEC Versa, change the setting to
“ON” and your current password is erased.
!
Switch 2 — Keyboard select; Default is “ON” for U.S. 85 key keyboard.
!
Switch 3 — Reserved for factory use; Default is “ON.”
!
Switch 4 — Keyboard select; Default is “ON” for U.S. 85 key keyboard.
!
Switch 5 — Password enable; Default is “OFF” (Personal Code Setting utility).
!
Switch 6 — Logo select; Default is “OFF” for U.S.
Default switch settings