Filter
Top Products
ReadyNAS 2100 User Manual
Optimizing Performance and Maintaining the System 5-11
v1.1, June 2009
3. Pull out the disk tray, remove the screws, and replace the failed disk.
4. Reassemble the disk tray. Make sure that the hard disk connectors face the interior of the disk
bay when you reassemble the disk.
5. If you want to prevent easy removal of the disk from the drive bay, set the tray lock.
6. Slide the disk tray back in to the unit and secure the latch.
Resynchronizing the Volume
If you had to power off to replace the failed disk, turn on the power on the ReadyNAS.
Figure 5-11
Figure 5-12
Unlocked: switch set to the right
Locked: switch set to the left