Filter
Top Products
GS700AT Smart Switch Software Administration Manual
6-8 Managing Security
v1.0, October 2008
In order to configure RADIUS/TACACS+ authentication, the user name should be configured as
$enab15$ on the RADIUS/TACACS+ server.
To configure the Authentication List method:
1. Click Security > Management Security > Authentication List. The Authentication List
screen displays:
The Authentication List screen contains the following fields:
• 1,2,3 – Select the order in which authentication is applied. The possible field values are:
– TACACS+ – Authenticate the user at the TACACS+ server. For more information,
see “TACACS+”.
– RADIUS – Authenticate the user at the RADIUS server. For more information, see
“RADIUS”.
– Local – Authenticate the user at the device level. The device checks the user name and
password for authentication
– None – Assign no authentication method to the authentication list.
2. Select the Authentication List entry.
3. Select the order of authentication (1,2,3) for each method from the list in the provided field in
the first row.
4. Click APPLY to update the device.
Figure 6-5