Filter
Top Products
GS700AT Smart Switch Software Administration Manual
Managing Security 6-17
v1.0, October 2008
To define port security:
1. Click Security > Traffic Control > Port Security. The Port Security screen displays:
The Port Security screen contains the following fields:
• Interface – Displays the port or LAG name.
• Status – Select the port security status. The possible field values are:
– Locked – The port is currently locked.
– Unlocked – The port is currently unlocked. This is the default value.
• Learning Mode – Select the locked port type. The possible field values are:
– Classic Lock – Locks the port, and only forwards packets that have been learned
statically or dynamically, prior to locking the port. The lock is effective immediately.
– Limited Dynamic Lock – The port is unlocked. Locks the port after a user-defined
number of MAC addresses have been dynamically learned on the port. After the port
is locked, packets are forwarded only from MAC addresses that have been learned
prior to locking the port.
• Max Entries – Enter the maximum number of MAC addresses that can be learned on the
port. The Max Entries field is enabled only if the Limited Dynamic Lock mode is selected.
The range is 1-128 entries. The default value is 1.
• Action – Select the action to be applied to packets arriving on a locked port. The possible
field values are:
Figure 6-10