Filter
Top Products
GS700AT Smart Switch Software Administration Manual
7-14 Monitoring the Switch
v1.0, October 2008
To refresh or clear the RMON Advanced Statistics screen:
1. Open the RMON Advanced Statistics screen.
2. Click REFRESH or CLEAR ALL COUNTERS to clear or reset the RMON Advanced
Statistics screen.
History Control
The RMON History Control screen contains information about samples of data taken from ports.
For example, the samples may include interface definitions or polling periods.
To configure RMON history information:
1. Click Monitoring >RMON > Advanced > History Control. The RMON History Control
screen displays:
The RMON History Control screen contains the following fields:
• History Entry No. – Displays the entry number for the History Control Table screen.
• Source Interface – Enter the interface from which the history samples were taken.
• Sampling Interval – Enter in seconds the time that samples are taken from the ports. The
field range is 1-3600. The default is 1800 seconds (equal to 30 minutes).
• Samples Requested – Enter the number of samples to be saved. The field range is
1-65535. The default value is 50.
• Current Number of Samples – Displays the current number of samples taken.
• Owner – Enter the RMON station or user that requested the RMON information.
Figure 7-8