Filter
Top Products
GS700AT Smart Switch Software Administration Manual
8-2 Maintenance
v1.0, October 2008
To reset the device:
1. Click Maintenance > Reset > Device Reboot. The Device Reboot screen displays:
2. Check the confirmation box.
3. Click APPLY to reboot the device.
Factory Default
The Factory Default screen allows network managers to reset the device to the factory defaults
shipped with the switch. Restoring factory defaults results in erasing the configuration file.
To reset the device to the factory defaults:
1. Click Maintenance > Reset > Factory Default. The Factory Default screen displays:
2. Check the confirmation box.
3. Click APPLY to reset the device to the factory defaults.
Figure 8-1
Note: Selecting this option automatically reboots the device.
Figure 8-2