NETGEAR GS700AT Switch User Manual


 
GS700AT Smart Switch Software Administration Manual
3-25 Managing System Settings
v1.0, October 2008
To configure system parameters:
1. Click System > Management > System Information. The System Information screen
displays:
The System Information screen contains the following fields:
System Name – Enter the user-defined device name. The field may contain 0-160
characters.
System Location – Enter the location where the system is currently running. The field
may contain 0-160 characters.
System Contact – Enter the name of the contact person. The field may contain 0-160
characters.
System Object ID – Displays the vendor’s authoritative identification.
Date & Time – Displays the current date and local time.
System Up Time – Displays the amount of time since the most recent device reset. The
system time is displayed in the following format: days, hours, minutes, seconds. For
example, 41 days, 2 hours, 22 minutes, 15 seconds.
Idle Timeout – Enter the amount of time (minutes) that elapses before an idle station is
timed out. Idle stations that are timed out must login to the system. The field range is 5 -
30 minutes. The field default value is 10 minutes.
Base MAC Address – Displays the MAC address of the device.
Figure 3-1