Filter
Top Products
GS700AT Smart Switch Software Administration Manual
Configuring Switching Settings 4-20
v1.0, October 2008
To configure Port PVID parameters:
1. Click Switching > VLAN > Advanced > Port PVID Configuration. The Port PVID
Configuration screen displays:
The Port PVID Configuration screen contains the following fields:
• Interface – Displays the interface id (port number or LAG number) to which the PVID tag
is assigned.
• PVID – Enter the PVID value. The possible field range is 1-4093.
2. Select an interface.
3. Enter the PVID in the provided field in the first row.
4. Click APPLY to update the device.
Voice VLAN
Voice VLAN allows you to enhance VoIP service by configuring ports to carry IP voice traffic
from IP phones on a specific VLAN. VoIP traffic has a preconfigured OUI prefix in the source
MAC address.
You can configure VLANs on which voice IP traffic is forwarded. Non-VoIP traffic is dropped
from the Voice VLAN in auto Voice VLAN secure mode. Voice VLAN also provides QoS to
VoIP, ensuring that the quality of voice does not deteriorate if the IP traffic is received unevenly.
The system supports one Voice VLAN.
There are two operational modes for IP Phones:
Figure 4-15