Filter
Top Products
N300 Wireless Router
JWNR2010v3
Installation Guide
Power adapter
Package Contents
Wait approximately two minutes
until your modem turns on.
If your modem has a battery backup,
first remove and reinsert the battery
before connecting your
modem to power.
Step 1:
Unplug the power
to turn off your modem.
Step 2:
Connect one end of the blue
Ethernet cable to your modem,
and the other end to the Internet port
on your router.
Plug in, then turn on your modem.
Step 3:
Step 6:Step 4:
Connect the power adapter to the
router, plug the power adapter into
and outlet, and press the
Power On/Off button on the router.
Wait until the Wireless LED turns
solid green.
Step 5:
Use another Ethernet cable to establish
a wired connection as shown in this diagram.
Optionally, connect wirelessly by using the
preset wireless security settings
located on the product label on the router.
Open a browser.
Modem
or Cable
Internet
DSL
(not included)
Connect the router
to your computer.
N300 Wireless Router
Ethernet cable
If the web page does not display,
close and reopen the browser
and enter http://routerlogin.net
in the address bar. The user name
and password are on the
product label on the router.
N300 Wireless Router