Filter
Top Products
System Maintenance
216
ReadyNAS OS 6.1
System Real-Time and Historical Monitoring
The ReadyNAS provides status graphics for volume throughput, network throughput, volume
utilization, and system temperatures.
Note: Status graphics are not supported for ReadyNAS 102 and 104
systems.
To display and configure the system status graphics:
1. Select System > Performance.
2. Scroll down to V
olume, Network, Utilization, or Temperature to view the corresponding
status graphics.
The following sections describe the information displayed on these status graphics.
Volume
The Volume throughput graphic shows the number of read and write operations per second.
The range is flexible and depends on your selections from the drop-down lists above the
graphic. For example, the range can be from 0 to 200 operations. The upper part of the
graphic indicates the number of read operations (indicated by positive numbers). The lower
part of the graphic indicates the number of write operations (indicated by negative numbers).
From the drop-down lists above the graphic, you can adjust the following settings:
• V
olume. Select all volumes or individual volumes.
• T
ype. Select the number of operations per second or the bandwidth consumed per
second.
• Period. Select the period over which the operations or bandwidth is measured.
You can
select from 5 minutes to 1 year.