Filter
Top Products
Advanced Settings
75
N600 Wireless Dual Band Gigabit Router WNDR3700v4
2. Select the Enable Access Point Mode check box.
3. Scroll down to view the bottom half of the screen to display more instructions.
4. Use an Ethernet cable to connect the Internet port of this router to a LAN port in the other
router
.
5. Select the check box for the IP address setting that you want to use:
• Get an IP address dynamically from the other router.
The other router on the
network assigns an IP address to this router while this router is in AP mode.
• Fixed IP address (not recommended). Use this setting if you want to manually
assign a specific IP address to this router while it is in
AP mode. Using this option
effectively requires advanced network experience.
6. Click Apply.
Wireless Repeating Function (WDS)
You can set the router up to be used as a wireless access point (AP). Doing this enables the
router to act as a wireless repeater. A wireless repeater connects to another wireless router
as a client where the network to which it connects becomes the ISP service.