NETGEAR WNDR3700V4 Network Router User Manual


 
Advanced Settings
77
N600 Wireless Dual Band Gigabit Router WNDR3700v4
station, dual-band concurrent mode is not affected.
For you to set up a wireless network with WDS, both access points must meet the following
conditions:
Both access points have to use the same SSID, wireless channel, and encryption mode.
Both access points have to be on the same LAN IP subnet.
That is, all the access point
LAN IP addresses are in the same network.
All LAN devices (wired and wireless computers) are configured to operate in the same
LAN network address range as the access points.
To view or change the Wireless Repeating Function settings:
Select Advanced >
Advanced Setup > Wireless Repeating to view or change wireless
repeater settings for the router.
Scroll to view
more settings
The following settings are available:
Enable W
ireless Repeating Function. Select the check box for the 2.4-GHz or 5-GHz
network to use the wireless repeating function.
W
ireless MAC of this router. This field displays the MAC address for your router for
your reference. You need to enter this MAC address in the corresponding Wireless
Repeating Function screen of the other access point you are using.
W
ireless Repeater. If your router is the repeater, select this radio button.
Repeater IP Address. If your router is the repeater
, enter the IP address of the other
access point.