Filter
Top Products
Advanced Settings
84
N600 Wireless Dual Band Gigabit Router WNDR3700v4
• Port triggering does not require that you know the computer’s IP address in advance. The
IP address is captured automatically.
• Port forwarding requires that you specify the computer
’s IP address during configuration,
and the IP address can never change.
• Port triggering requires specific outbound traf
fic to open the inbound ports, and the
triggered ports are closed after a period of no activity.
• Port forwarding is always active and does not need to be triggered.
Set Up Port Forwarding to Local Servers
Using the port forwarding feature, you can allow certain types of incoming traffic to reach
servers on your local network. For example, you might want to make a local web server, FTP
server, or game server visible and available to the Internet.
Use the Port Forwarding screen to configure the router to forward specific incoming protocols
to computers on your local network. In addition to servers for specific applications, you can
also specify a default DMZ server to which all other incoming protocols are forwarded.
Before starting, determine which type of service, application, or game you want to provide.
Find out the local IP address of the computer that will provide the service.
The server
computer has to always have the same IP address.
To set up port forwarding:
Tip: T
o ensure that your server computer always has the same IP address,
use the reserved IP address feature of your WNDR3700v4 router.
1. Select Advanced Setup > Port Forwarding/Port T
riggering to display the following
screen:
Port Forwarding is selected as the service type.
2. From the Service Name list, select the service or game that you will host on your network. If
the service does not appear in the list, see Add a Custom Service on page 85.
3. In the corresponding Server IP
Address field, enter the last digit of the IP address of your
local computer that will provide this service.
4. Click Add.
The service appears in the list in the screen.