Filter
Top Products
E92
The Setup Menu
Reference Section
Blink Warning
Choose whether or not blinking eyes are detected when using face detection
(A85) in the following shooting modes.
• In the following scene modes: Scene auto selector (A40), Portrait (A40) or
Night portrait (A41)
• Shooting modes A, B, C, D, E, F, N, O (low noise night) and u
(special effects) (when Face priority (E48) is selected for AF area mode)
The Did someone blink? Screen
If no operations are performed for a few seconds, the
screen automatically returns to the shooting screen.
• To zoom in the face for which blinking was detected,
rotate the zoom control toward g (i). To return to
full-frame playback mode, rotate the zoom control
toward f (h).
• When the camera detects that one or more human
subjects have closed their eyes, press H, I, J or K during playback zoom to
display other faces. Other faces can also be displayed by rotating the main
command dial.
• Press the l button to delete the picture taken.
• Press the k button to return to shooting screen.
B Note on Blink Warning
This feature may not be used in combination with certain features. See “Features That Cannot Be Used
Simultaneously” (A80) for more information.
Press the d button M z tab (A13) M Blink warning
Option Description
On
The Did someone blink? screen is displayed on the monitor if
the camera detects that a human subject may have closed the
eyes immediately after recognizing the face. The face of the
human subject that may have closed his/her eyes is framed by a
yellow border. You can check the picture taken and determine if
you need to take the picture again.
Off (default setting) The camera does not detect blinks.
Exit
Did someone blink?
Exit