Filter
Top Products
18
The Basics of Shooting and Playback
The Basics of Shooting and Playback
Preparation 1 Charge the Battery
1 Prepare the included Battery Charger MH-24.
If a plug adapter* is included with your camera, attach the
plug adapter to the plug on the Battery Charger. Push the plug
adapter firmly until it is securely held in place. Once the two
are connected, attempting to forcibly remove the plug
adapter could damage the product.
* The shape of the plug adapter varies according to the
country or region in which the camera was purchased.
The Battery Charger comes with the plug adapter attached in
Argentina, Brazil and Korea.
2 While pushing in the battery (1), set it into the Battery Charger (2).
3 Plug the Battery Charger into an electrical outlet.
• CHARGE lamp starts blinking when charging starts.
• A fully-exhausted battery charges in about one hour and
30 minutes.
• When charging is complete, the CHARGE lamp stops
blinking.
• See “Understanding CHARGE Lamp” (A19).
4 When charging is complete, remove the battery and then disconnect
the Battery Charger from the electrical outlet.
1
2
CHARGE
lamp