Filter
Top Products
25
Basic Steps for Shooting and Playback
Turning the Camera On and Off
• When the camera is turned on, the power-on lamp (green) lights and the monitor turns on
(the power-on lamp turns off when the monitor turns on).
• To turn off the camera, press the power switch. When the camera is turned off, both the
power-on lamp and the monitor turn off.
• To turn on the camera in playback mode, press and hold the c (playback) button. The
lens will not extend.
C Power Saving Function (Auto Off)
If no operations are performed for a while, the monitor will turn off, the camera will enter standby
mode, and the power-on lamp will flash. If no operations are performed for approximately another
three minutes, the camera will turn off automatically.
To reactivate the monitor while the power-on lamp is flashing, press any of the following buttons:
- Power switch, shutter-release button, A (shooting mode) button, c (playback) button, or b
(e movie-record) button.
• The time allowed to elapse before the camera enters standby mode can be changed from the
Auto off option (A99) in the setup menu (A98).
• By default, the camera enters standby mode in about one minute when you are using shooting
mode or playback mode.
• When the AC Adapter EH-62G (available separately) is used, the camera enters standby mode after
30 minutes (fixed).
C AC Power Supply
• If the AC Adapter EH-62G (available separately; E94) is used, COOLPIX S3500 can be powered
from an electrical outlet and operated for shooting or playback.
• Do not, under any circumstances, use another make or model of AC adapter other than the
EH-62G. Failure to observe this precaution could result in overheating or in damage to the camera.
710710
8
m
0s8
m
0s
Flashes
No operations
performed
No operations
performed
3 min
Camera enters standby mode Camera turns off